Gold Seashell Wall Light
QN 38448-442A Ø 260 mm dish in textured gold, tipped away from the wall so its lower lip curls forward and catches an opal glass sphere. The disc does the work: light leaves the sphere, washes the inside of the dish and comes back off the wall as a soft, wide field rather than a point. Nothing glares, because the only luminous surface you can see is the ball itself, and it sits low enough to read as a detail rather than a lamp. 8 W from a Bridgelux V6HD board at CRI 90 and 3000 K, on a 250 mA constant-current driver with flicker measured at 0.5 %. Switched on and off, IP20, 100 mm deep — a corridor, a bed head, a stair landing.
Gold Seashell Wall Light (QN 38448-442) is built as a wall luminaire and specified at LED 8W, with 3000K, a colour rendering index of CRI 90 and IP20 ingress protection. It is finished in Gold, and is typically specified for residential, hotel, restaurant, retail schemes. Dimensioned drawings are shown below; IES / LDT photometric files and finish samples are supplied on request for specification and lighting-calculation work.
| Availability | Made to order |
| Luminous flux, lm | — |
| CCT, K | 3000K |
| Power consumption, W | 8W · 220–240V ~50Hz |
| Color rendering (CRI) | 90 |
| Light distribution | Indirect · dish reflector |
| Light source | Bridgelux V6HD · original |
| Driver output | 250mA constant current |
| IP Code | IP20 |
| Size | 260 × 260 × 100 |
| Finishes | Gold |
Applications
Configure Seashell
Dimensions & mounting
| Mounting | Surface · wall |
| Dimensions, mm | 260 × 260 × 100 |
| Diffuser | Opal glass sphere |
| Case material | Metal · gold finish |
| Warranty | 3 years |
Driver
Downloads
The simplified 3D model is an envelope generated from the published dimensions for layout and clash checks; it carries no optics, driver or fixing detail. The manufacturer's CAD is supplied on request.



