White Porter Table Lamp
QN 42031-454A lantern reduced to its frame: four slim white uprights, a handle to carry it by, and a lit panel held in the middle so the glow reads through the open sides rather than off a shade. It runs from two 2200 mAh lithium cells — 12 hours on a 6–8 hour charge — so there is no cable to route across a terrace table: set it down where the evening is happening and pick it up when it moves. A touch on the base switches and dims it. 2.2 W gives 180 lm at a warm 3000 K, CRI above 80, in a 42° spread that lights the table top and the faces around it without spilling into the garden. Die-cast aluminium, powder coated over an outdoor pretreatment, with clear polycarbonate panels and a silicone gasket: IP54, so a shower does not send it indoors. Matte Sandy White.
White Porter Table Lamp (QN 42031-454) is built as a table luminaire and specified at LED 2.2W, with 3000K, a colour rendering index of CRI ≥80 and IP54 ingress protection. It is finished in Sandy White, and is typically specified for terrace, restaurant, hotel, residential schemes. Dimensioned drawings are shown below; IES / LDT photometric files and finish samples are supplied on request for specification and lighting-calculation work.
| Availability | Made to order |
| Luminous flux, lm | 180lm |
| CCT, K | 3000K |
| Power consumption, W | 2.2W · DC 3.7V |
| Color rendering (CRI) | ≥80 |
| Battery | 2 × 2200 mAh lithium · charge 6–8 h · run time 12 h |
| Switch | Touch switch on the base |
| IP Code | IP54 |
| Size | H 380 |
| Finishes | Sandy White |
Applications
Configure Porter
Your configuration
Dimensions & mounting
| Mounting | Table · free-standing, portable |
| Dimensions, mm | H 380 |
| Diffuser | Clear polycarbonate |
| Case material | Die-cast aluminium · powder coated, outdoor pretreatment · silicone gasket |
| Warranty | 3 years |



